TOTAL TRANSFER PAD PRINTING MACHINE
The pad printing technology enables the application of ceramic colour, glass enamel or precious metal by Total Transfer. The process can be applied on flat- or holloware with complex shapes.
The application of colour is achieved by a deformed and heated silicone pad. It can be used on glass, ceramic or enamel steel.
CERINNOV has a range of automated and semi-automated machinery, enabling complex decorations of 1 – 8 colours.
DECORATION ON ANY SURFACE
1 to 8 COLOURS
ENGRAVED PLATE PRINTING MACHINE
The machine has been created for the application of high quality complex decoration of 1 – 6 colours on to ceramic articles (unglazed biscuit or glazed articles). The process uses an engraved plate made of steel or polymer allowing the reproduction of the decoration, and a silicone pad to transfer the decoration on to the article.
This machine operates with both cold and thermoplastic inks, because it integrates a heating system. Thanks to the pad lift settings and the support table of the article, different articles can be decorated.
HIGH DEFINITION & QUALITY
This machine has been designed to apply high quality single colour decoration to glass or ceramic (biscuit or glazed) items. The process uses an engraved steel or polymer plate to reproduce the decoration and a silicone pad to transfer the decoration to the item.
TECHNOLOGY "TOTAL TRANSFER"
HEAT RELEASE DECAL APPLICATION
These machines are designed to automatically apply chromos to glass or ceramic articles, using a stock of chromos, a heating plate equipped with a suction device and a preheated silicone pad. The application of the chromo on the article to be decorated is carried out by a flexible and deformable pad, this process allows the decoration of flat, irregular or complex surfaces. Once the chromos have been applied to the articles, no additional operations are necessary and the products can be directly placed in the kiln.
MULTIPLE APPLICATION ON 1 ARTICLE
360° HEAT RELEASE
The machine consists of four stations turret indexing in a vertical and carrying four fixed position chucks. The turret can be tilted to adjust for taper and lifted to adjust for the diameter of the item. Both settings are shown by digital positioning indicators.
Decals are fed individually from storage over a heated platen to a heated silicone roller. It removes the print from the decal paper and transfers it to the item. Heat controllers allow the temperature of the sillicone roller and the heated platen to be individually adjusted.
This enables an efficient applying of different types of decals. A fine tune adjustment synchronizes the pickup of the decal onto the silicone roller to give accurate positioning on the item relative to the handle.